Once the back cover is removed, the power board is under the metal cover:
The cover over the power board was removed:
Close up of power board: (The bad capacitors are in the upper right corner)
Bad Capacitors: (Bulging and leaking tops)
I desoldered the bad capacitors and bought replacement capacitors that had the same capacitance but higher voltage rating. The new capacitors were slightly larger but still fit.
Soldering job before and after trimming leads:
The new Capacitors:
The cables were reconnected, power board cover and back cover were replaced. The TV is good as new and functions perfectly.
No comments:
Post a Comment